46
HOW TO USE
THE APPLICATION SELECT MODES
GENERIC
To view Generic Info, click the Sensitivity Dial to the bottom of the Display Panel until
“Press ENTER For” is blinking. Spin to Generic Info and press Enter.
To enter a test condition:
Spin to Test: the condition default is OK and will blink slowly. If it is necessary to
change:
Click with the Sensitivity Control Dial and the condition (OK) will blink rapidly.
Spin to select a condition indication. The choices are; OK, CHK (check), NE (no entry),
and OK.
To Set, Click the Sensitivity Control Dial (the condition
will blink slowly).
Spin to Temperature should a Temperature entry be
desired.
Click on the Temperature setting (it will blink rapidly).
For example, if you are looking to enter a reading of
250; Spin to the left to select the value of “200” and to
the Right to select the value of 50).
Click to Set.
Press Enter to store the information or Spin and Click to
Exit.
