8
Chapter 2: Installation
airFiber
®
AF5/AF5U User Guide
Ubiquiti Networks, Inc.
5. Attach the
Pole Clamps
to the
Mount Brackets
.
a. Slide the slotted hole of each
Pole Clamp
over one
upper and one lower
M10x150 Carriage Bolt
.
b. Place one
M10 Serrated Flange Nut
on each
M10x150
Carriage Bolt
.
6. Attach the
Azimuth Support Bracket
s together.
a. Insert the two
M10x100 Carriage Bolts
into the
Azimuth
Support Bracket
that has two slotted holes.
b. Slide the slotted hole of the other
Azimuth Support
Bracket
over one
M10x100 Carriage Bolt
.
c. Place one
M10 Serrated Flange Nut
on each
M10x100
Carriage Bolt
.
7. Ensure that there is a 13 mm gap between the head
of each
Pre-Installed M10x25 Flanged Bolt
and the
corresponding trunnion on the airFiber radio.
13 mm
13 mm
Pole-Mounting
1. Attach the
Azimuth Support Brackets
to the pole just
beneath the area where the airFiber radio will be
attached.
Note:
The mounting assembly can accommodate a
Ø 38.1 - 101.6 mm (1.5" - 4.0") pole.
a. Orient the
Azimuth Support Brackets
around the pole so
it is aimed in the direction of the other airFiber radio.
b. Slide the open slot of the
Azimuth Support Bracket
over
the corresponding
M10x100 Carriage Bolt.
c. Tighten the
M10 Serrated Flange Nuts
to approximately
50 N-m.
