UBI EasyCoder 501 SA, Руководство по обслуживанию

Страница: 56 / 214

UBI EasyCoder 501 – Service Manual
56
8. PRINT UNIT, cont'd.
8.7
Printhead, cont'd.
Continued!
8 dots/mm (203.2 dpi) printhead in right-hand position
The 8 dots/mm printhead can be fitted in two positions. When the
printhead is fitted in the outer, right-hand position (see illustration),
dot No. 0 is situated 3 mm (0.12") inside the inner edge of the paper
web. Since the maximum print width is 104 mm (4.1") and the
maximum web width is 120 mm (4.7"), this leaves a margin of at
least 13 mm (0.51") along the outer edge of the web. If an 110 mm
(4.33") wide web is used, the printhead will be centre-aligned with
a 3 mm (0.12") margin on either side.
Dot 0
X-start Width
Origo
Length
Dot 831
PRINT
WINDOW
PRINT
WINDOW
PAPER FEED
DIRECTION
Dot-line
on printhead
From
paper supply
13 mm (0.51")
110 mm (4.33")
3 mm (0.12")
max. 120 mm (4.7")
104 mm (4.1")