UBI EasyCoder 501 SA, Руководство по обслуживанию

Страница: 28 / 214

UBI EasyCoder 501 – Service Manual
28
5.2
External Supply
5. PAPER SUPPLY, cont'd.
In addition to the internal paper roll, the EasyCoder 501 printer
family can also use thermal paper or receiving face material from
an external supply, e.g. an external paper roll or a stack of fan-folded
tickets. The paper is inserted into the printer through either the upper
or lower slot in rear plate.
It is important that the paper web is properly aligned in parallel with
the printer's centre-line wall. Therefore, UBI offers an optional
“Fan Fold Kit” consisting of a bracket with two guides that can be
fitted in either the upper or lower slot in the rear plate. The outer
guide is adjustable for different paper widths. The kit also contains
two shafts and two sets of guide rolls that can be fitted to the rear of
the print unit.
The kit can be used in many different ways as explained later in this
chapter.
This illustration shows a full installation on an EasyCoder 501 E.
Continued!
IMPORTANT PRINTHEAD AND RIBBON INFORMATION
The use of any thermal transfer ribbons, other than those supplied by UBI, will invalidate
the printhead warranty.
UBI thermal transfer ribbons are engineered specifically for this printhead.
The quality of thermal and thermal transfer media supplies in this printer is also of great importance
for the quality of printing bar codes and a long life of the printhead. UBI has carefully matched the
paper we recommend/provide to the needs of this printer. We therefore strongly advise of using
only UBI recommended/provided supplies to ensure a high quality printing.
TEAR-OFF
Shafts with Guide Rolls
External Guide
(upper position)
External Guide
(lower position)