EN – 43
Please always observe the tyroS® software user manual throughout the
entire training.
The PABLO® system connects itself automatically to your PC via Bluetooth technology as
soon as you start a therapy session with PABLO®. Please note the LED display at the
PABLO® Sensors (chapter 2.3.6). This gives information on which status the PABLO®
Sensors are currently in.
4.4
Performing training
4.4.1
Attaching the PABLO® system to the patient
The straps included in the set are meant to optimally attach the PABLO® components to
the patient and thus ensure the best therapy results possible.
Please note: Check for possible existing circulatory disorders before
attaching the straps to the patient.
In case of indication of any such disorder, the patient must be regularly
examined and checked for pain, swellings, and skin discoloration during
therapy with the PABLO® system. If the patient shows any signs of such
indications the therapy is to be suspended.
Attaching the PABLO® Handsensor
Proceed as follows when attaching the hand to the PABLO® Handsensor.
1.
Attach the safety strap to the wrist und pull it firmly. The safety strap helps
prevent the PABLO® Handsensor from falling to the ground and getting
damaged during therapy.
Figure 29: Attached safety strap
