EN – 46
2.
Click the PABLO® Motionsensor into the designated bracket. PLEASE NOTE:
When attaching the PABLO® Motionsensor, make sure that the arrow on the
housing always points upwards.
Figure 35: Correctly attaching the PABLO® Motionsensor
Using the straps to fixate the PABLO® Motionsensor may cause skin
irritations. Please check the patient regularly with regards to possible skin
irritations or allergic reactions if attaching the straps directly to the skin.
4.4.2
Application
Apply the PABLO® system and follow the instructions given by the software.
Please always observe the tyroS® software user manual throughout the
entire training.
4.5
After training
4.5.1
Detaching the patient from the PABLO® system
After use, detach the patient from all used PABLO® components.
4.5.2
Storing the PABLO® Sensors
After use, place all PABLO® Sensors (Handsensor and Motionsensor) in the designated
positions on the PABLO® Charger. The PABLO® Sensors automatically change into
charging mode (see LED display described in chapter 2.3.6).