EN – 31
Preparation/Basic Information
3.1
Installation of the Software
You will find a detailed installation guide in the instruction manual of the tyroS®
Software.
3.2
Installation of the Bluetooth adapter
The PABLO® system is connected to your PC with Bluetooth technology. In order to
produce this connection, it is first necessary to connect the Bluetooth adapter included
in the scope of delivery to your PC and to install it. If you have purchased a PC from
TYROMOTION this installation will already have been carried out.
Otherwise, connect the Bluetooth adapter to the USB extension and then to a free USB
port of your PC and follow the installation instructions of your PC.
Figure 13: Bluetooth adapter
Figure 14: Bluetooth adapter incl. USB
extension
Use only the supplied adapter to set up the Bluetooth connection.
3.3
Connecting PABLO® system to the PC
Important points before the installation:
The PABLO® Sensors must be fully charged before being used for the first time.
The PABLO® Sensors must not be more than 10 meters away from the PC.
The PABLO® Sensors must be turned on.