EN – 47
Make sure all PABLO® components are securely stowed after use so
they cannot fall on the floor and thus cause harm to patients and or
break.
4.5.3
Cleaning PABLO® system and associated parts
The following hygiene measure must be carried out:
Disinfection of the patient’s hand before the start of therapy
Disinfection of the sensor surfaces after therapy
In the event of heavy perspiration, wipe the sensor dry after therapy
Regular washing of the hand straps on a gentle wash at 30°C. The use of a wash
bag and hygienic rinses is recommended
The PABLO® system should be thoroughly cleaned in regular intervals in addition to
performing the abovementioned disinfection measures. All surfaces and objects that
come into contact with the patient and the therapist should be cleaned and disinfected
in order to minimize the risk of spreading germs. Use a disposable cloth with alcohol-
containing surface disinfectant for disinfection and cleaning since this method does not
require a long application time. Ensure that the disposable cloth is only lightly dampened
with disinfectant! Never use abrasive cleaning agents, soaps or caustic solvents. Contact
TYROMOTION GmbH if you are unable to clean severe contaminants.
The hygienic instructions stated in this chapter must be strictly
observed.
4.5.4
Switching off the PABLO® system
Terminate the application by exiting the tyroS® Software and closing down the PC.
If a PABLO® Sensor is disconnected from the software for more than an hour, it will
switch off automatically.
Please always observe the tyroS® software user manual throughout the
entire training.
