Tyco RDU Mk2, Инструкция по установке и программированию, Страница: 92 / 178

RDU Mk2 Installation & Programming Manual Document No: LT0499
Programming Part 1
Page 6-38 8 April 2015 Issue 1.02
Parameter Options Default value Refer
Section
MISCELLANEOUS OPTIONS
Legacy bells Disable
Warning system
External bell Disable 6.4.1.6
All zones isolated operates
standby Enable/disable Enable
6.4.4.6
Warning system maps to MAF Yes / No Yes 7.4.3
External bell maps to MAF Yes / No Yes
7.4.3
Brigade test enable Enable/disable Disable 6.4.4.5
Common LEDs show - local
status, remote status Enable/disable Local status enabled
FIP status disabled
6.4.4.8
Capture FIP time/date Enable/disable Enabled 6.4.4.2
LOGIC EQUATIONS
No default equations. 7.3
FF OPTIONS
FF Auto ack Enable/disable Disabled 6.4.4.1
FF Type 2/3 3 6.4.4.1
FF Display cause by default Enable/disable Disabled
6.4.4.1
New cause new alarm Enable/disable Disabled 6.4.4.1
Multiple cause updates Enable/disable Enabled 6.4.4.1
Switch to newest alarm Enable/disable Disabled 6.4.4.1
Show zone number in FF Enable/disable Enabled
6.4.4.1
Show isolated alarms in FF Enable/disable Enabled 6.4.4.1
Show point text in FF for zone Enable/disable Disabled 6.4.4.1
Show FIP zone names in FF Enable/disable Enabled
6.4.4.1
Capture FIP zone name from
alarms Enable/disable Disabled
6.4.4.2
FF alarm source LCD, LED, Both LCD 6.4.4.1
BATTERY/ MAINS/ CHARGER OPTIONS
Mains frequency 50 Hz; 60 Hz 50 Hz 6.4.4.10
Mains fail is fault after 8 hours Yes/ No/ Disable No (not a fault)
6.4.4.10
Charger high/low monitoring Enable/disable Enabled if MAF bd present 6.4.4.10
Battery low monitoring Enable/disable Enabled 6.4.4.10
Battery very low monitoring Enable/disable Enabled 6.4.4.10
Battery connection test Enable/disable Enabled if MAF bd present
6.4.4.10
Hourly battery test Enable/disable Enabled if MAF bd present 6.4.4.10
Daily battery test Enable/disable Enabled if MAF bd present 6.4.4.10
BUZZER OPTIONS
Follow FIP alarm buzzer Enable/disable Disabled 6.4.4.12
Follow FIP fault buzzer Enable/disable Disabled 6.4.4.12
Zone alarm buzzer Enable/disable Enabled 6.4.4.12
Zone fault buzzer Enable/disable Enabled if Australian mode 6.4.4.12
System fault buzzer Enable/disable Enabled if Australian mode 6.4.4.12
Non-maf zone fault buzzer Enable/disable Disabled 6.4.4.12
Fault sounder after 8 hours fault Enable/disable Enabled if Australian mode
6.4.4.12
Fault sounder after 8 hours isolate Enable/disable Enabled if Australian mode 6.4.4.12
Fault re-sound period 0 - 255, units 6
minutes 80 (8 hours) 6.4.4.12