Tyco RDU Mk2, Инструкция по установке и программированию, Страница: 91 / 178

Document No: LT0499 RDU Mk2 Installation & Programming Manual
Programming Part 1
Issue 1.02 8 April 2015 Page 6-37
6.5 RDU PROGRAMMABLE PARAMETER LIST
The following table lists all of the programmable parameters.
TABLE 6.5.1
PROGRAMMABLE PARAMETERS
Parameter Options Default value Refer
Section
GENERAL
FF Operating mode AS4428.1
AS1603.4 AS4428.1
6.4.1.1
Address 1 - 8 1 6.4.1.3
Site text 40 characters
6.4.3
Fault action text 40 characters Contact your service company
6.4.3
Access codes users 0 - 9 User 0, access code 000000 6.4.2
Tandem mode password 12 characters FIRES 6.4.3
Mimic mode Enable/disable Disabled
6.4.1.2
Protocol type non-LCD, LCD-A LCD-A 6.4.1.4
HARDWARE SETTINGS
MAF Board Enable/disable According to hardware
7.1
LED Display boards 0 - 33 According to hardware 7.1
Max LEDs on 1 - 240 240 7.1
Keypad type AS4428.1
AS1603.4 AS4428.1 6.4.1.5
MCP Enable/disable Enabled for MAF RDU 6.4.4.4
USER COMMAND OPTIONS
Global Ack Enable/disable Disabled 6.4.4.1
Global Reset Enable/disable Disabled 6.4.4.1
Global Isolate Enable/disable Disabled
6.4.4.1
Type 3 Global Ack Enable/disable Disabled 6.4.4.1
Ancil 1 isolate Pass-on, follow,
local MAF RDU - local control
enabled. Non-MAF - pass-on
& follow enabled. 6.4.4.3.6
Warning System isolate Pass-on, follow,
local MAF RDU - local control
enabled. Non-MAF - pass-on
& follow enabled.
6.4.4.3.1
Warning System operate Pass-on, follow,
local MAF RDU - local control
enabled. 6.4.4.3.2
External Bell isolate Pass-on, follow,
local MAF RDU - local control
enabled. Non-MAF - pass-on
& follow enabled. 6.4.4.3.1
External Bell operate Pass-on, follow,
local MAF RDU - local control
enabled. 6.4.4.3.3
Bells isolate (AS1603.4 only) Pass-on, follow,
local MAF RDU - local control
enabled. Non-MAF - pass-on
& follow enabled. 6.4.4.3.4
Bells operate (AS1603.4 only) Pass-on, follow,
local MAF RDU - local control
enabled.
6.4.4.3.5
Services Restore (NZ only) Pass-on, follow,
local If NZ mode, all enabled. 6.4.4.3.6
Trial Evac (NZ only) Pass-on, follow,
local If NZ mode, all enabled. 6.4.4.3.7