Tyco RDU Mk2, Инструкция по установке и программированию, Страница: 160 / 178

RDU Mk2 Installation & Programming Manual Document No: LT0499
Alignment, Adjustment & Placing Into Operation
Page 9-6
8 April 2015 Issue 1.02
9.2.4 COMMISSIONING CHECKLIST: MAF RDU
The following checklist should have been completed and supplied by the manufacturer. It
should be placed with other System Configuration Information. Commissioning staff should
check the installed RDU against it. (Note that all PCBs are electronically tested and
adjusted before being fitted to the RDU).
1. CABINET & GENERAL
A) Cabinet colour - Standard Cream Wrinkle (BFF 998 CW)
- Other: ______________________________________
B) Cabinet undamaged (Paint OK)
C) Door aligned correctly
D) Window undamaged and fitted correctly
E) MCP fitted and undamaged
F) Cabinet Door locks firmly, operates microswitch
G) Lock - 003 Type & two keys supplied
H) Door seals fitted to top and sides
I) Display Keypad and 4U door fitted & aligned correctly
J) Standoffs fitted to cabinet rear (none missing)
K) Operator Manual, battery leads & MCP key included
L) VIGILANT
TM
RDU label completed
2. PCBS & WIRING
A)
MAF/PSU Fitted securely on standoffs
B) Controller/Display fitted securely
C) FRC Looms fitted correctly
D) MCP & door switch wires fitted to J6 of MAF/PSU, secured
E) Earth wire fitted to display door
F) All modules earth to cabinet metal