TV One C2-7000 Series, Руководство пользователя

Страница: 65 / 120

C2-7000 S
ERIES
O
PERATION
M
ANUAL
59
This parameter controls whether the ‘welcome’ screen is displayed or not on
power up for units with an on-screen display – it can be disabled as required.
This is useful when a unit is installed as part of an overall system.
When turned on, the previously explained Adjust resolutions menu structure is
exposed. The default condition is ‘Off’, to prevent accidental changes.
This parameter is available on certain units and controls how bright the LEDs
on the front panel appear.
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. The rate can be adjusted to 9600, 19200, 28800, 33600,
38800, 57600 and 115200. (This adjustment is provided for those instances
where you wish to use the RS-232 control system for your own purposes.)
The default baud rate is 57600.
The screen labeled ‘Buzzer’ is actually the control for turning the “Beep” “On”
or “Off”. Normally this is left in the “On” position to provide positive feedback
that your data entries and parameter changes have been accepted.
This screen is an informational screen showing the total number of the
defined resolutions in the resolution database. Future firmware releases may
increase the total number of resolutions defined in the database.
System
Advanced Menus [Off]
System
RS232 baud rate [57600]
System
Buzzer [ On]
System
Resolutions
88
System
OSD on power up [On]
System
LED brightness % [ 90]
System
Logos / T-cards 1 / 4