TV One C2-7000 Series, Руководство пользователя

Страница: 54 / 120

C2-7000 S
ERIES
O
PERATION
M
ANUAL
48
8.10 Items Associated with the Adjust sources group
The ‘Adjust Sources’ menu group accesses the parameters associated with
the processing amplifiers used for each input (RGB, CV, YC, etc.). They
allow you to fine-tune an incoming signal to optimize its color, brightness or
even sharpness.
Not all settings are available for all input types, and not all input types listed
here may be available on your unit.
It is recommended that you Store your settings once you’re happy with them
in readiness for future use.
This menu item selects the input connection for which you want to make
adjustments to. As in the image above, changes will only be made to the
source connected to RGB1. Once the selection has been made, all changes
made using the following operating parameters will only apply to the selected
input.
Selection of a CV/YC source will reveal different menu
items that allow adjustments beyond those used for RGB
sources. The menu discussions that follow relate first to
RGB sources, then to CV / YC type sources.
8.10.1 RGB Source Menu Items
Once the Autoset sense setting has been made, this menu item is accessed
and activated. The Autoset sense utility will then correct the pixel phase and
then position the Top Left portion of the image and the Bottom Right portion of
the image. Once complete it then resume inactive status.
This menu item allows manual positioning of the Top and Left portion of the
image. It is used to ensure that the input signal is captured correctly,
eliminating any black borders. These settings are often used to correct the
position of a PC signal on an input, or to eliminate any undesired noise at the
top or bottom of a PAL or NTSC video source.
Source: RGB1
TL pos. adj. [ 0] [ 0]
Source: RGB1
Autoset status [Inactive]
Source: RGB1
Source to adjust [RGB1]