TV One C2-7000 Series, Руководство пользователя

Страница: 85 / 120

C2-7000 S
ERIES
O
PERATION
M
ANUAL
79
11.2 Creating a Macro
On the 10-key front panel units, you can store up to 5 macros and associate
them with 5 different buttons of your choosing. It is also a good idea to assign
another button to the Restore function. This restore function allows the unit to
be returned to it previously saved state, thus allowing you to toggle between a
preset condition and this saved state. See the ‘Adjust buttons’ menu for how
to change a particular button to a macro button.
On 48-key front panel units, there are buttons dedicated to 7 macros – 4 are
‘un-shifted’ and the remaining 3 are available when using the SHIFT button.
Change mode:

Move to the top of the menu structure and change the device mode to
Dual PIP

Press and hold the macro button (including SHIFT if needed) until the
unit gives a short beep and the display says Info: Added to Macro. This
has now added the operational mode for Dual PIP to the macro.
Adjust the windows

Enter the Adjust windows menu

Go to the Source screen.

Note that the top line of the display reads 1A

Change the source to RGB1

Press and the macro button (using SHIFT if needed) until the unit gives
a short beep and the display says Info: Added to Macro. This has now
added the Source selection for 1A to the macro

Press button 1 to change the window to window B

Change the source for window B to be RGB2

Press and the macro button (using SHIFT if needed) until the unit gives
a short beep and the display says Info: Added to Macro. This has now
added the Source selection for 1B to the macro

Press button 1 to change the window back to window A

Got to the menu item for Shrink

Adjust the shrink value so that window A is at 50 % and window B is
revealed

Press and hold the macro button (using SHIFT if needed) until the unit
gives a short beep and the display says Info: Added to Macro. This has
now added the Shrink value for window 1A to the macro

Go to the next item, H/V Shr. Pos

Adjust the H component to move window A to the far left of the screen
(100%)