Tuttnauer AMS11-120-T, Руководство по эксплуатации и обслуживанию, Страница: 89 / 105

11.4 Open the printer top cover
1. Remove the two tapes bonding the printer body to its cover (1) on each
opposite sides of the printer.
2. Pull the two handles left and right (2) simultaneously together forward as
shown by the arrows in figure 1.
3. The top printer cover will lift as shown in the figure indicated by 2.
11.5 Loading thermal printer paper roll/ Label roll
You can either load a thermal paper roll, or label roll on the printer roll
compartment opening.
You can also connect two printers to the autoclave, one loaded with thermal
paper roll, and the second printer loaded with label roll.
1. Slide switch (item 1) forward shown in fig 2, it will allow to move the roll
holders (2) apart as shown in fig 1 below, allowing to put the paper roll on
the holders.
2. Adjust the roll holder (2) as shown in (item 3) in figure 3 depending if a
thermal or label roll is installed.
3. Place the thermal paper roll or label paper roll as shown in (item 4) figure
3.or,
4. Place the label roll as shown in (item 5) figure 4.
Page 82