Tuttnauer AMS10-230-T, Руководство по эксплуатации и обслуживанию

Страница: 65 / 90

65
Symbol / Message Symbol / Message Description
Required
Action (if
applicable)
Sym-
132
Good Water level (Waste water tank)
Sym-
134
Full
Water
level (Waste water tank)
Sym-
140
Alert Press to watch the alert description
When cycle is selected it is
highlighted in red
----
The "cycle succeeded" message
and symbol are displayed when
the cycle ends successfully.
----
The "cycle Failed" message and
symbol are displayed when the
cycle failed either due to intended
cycle abort action by the user, or
due to a run-time error.
Try Perform a new cycle in order to
sterilize the load.
Error messages & Troubleshooting
Req ID Message Description
Msg-100 “Door is Open”
In STBY stage, when Door switch (DI 1) Open AND Door
lock DO 2 is ON
Msg-110 Canceled
Msg-120
"Analog Input
Error"
This message is displayed when any Temperature sensor
or Pressure sensor is disconnected or out of range.
* The name of the input should appear in the message
( Task 4642 : If one of the analog inputs disconnected - the
name of the input should appear in the message (Now its-
Analog inputs error))