Tuttnauer AMS10-230-T, Руководство по эксплуатации и обслуживанию

Страница: 19 / 90

19
Safety Notes

All new autoclave users must undergo a period of training in proper usage under an
experienced employee.

Before initial use, check the autoclave chamber to ensure that no packaging
materials have been left inside.

Before use, check inside the autoclave chamber to ensure that no items have been
left from the previous cycle.

Always verify that you have chosen the appropriate sterilization program

After the cycle, open the door slowly to allow steam to escape and wait 20 seconds
before you remove the load.

A certified inspector must perform a periodic pressure chamber safety test
according to the local regulations.

Once a year, or more frequently, effectiveness tests must be performed, i.e.,
calibration and validation.

Make sure there are no leaks, breaks, blockages, whistles or strange noises.

Perform maintenance operations as instructed. The owner of the autoclave is
responsible to perform the maintenance operations.

Notify the person in charge immediately of any deviation from the normal
functioning of the device.

Protective equipment and clothes and other safety instructions shall be
implemented in accordance with local and national regulations and/or rules.
2.3 Safety features incorporated in the device
The pressure vessel chamber door has the following features protecting
personnel from hazards:

Two door switches indicate that the door is closed. Without this indication steam is
not introduced into the chamber.

An electrical door locking pin that blocks door opening during operation.
The following safety devices are installed in the autoclave to optimize its safe
operation:

Safety thermostat, to prevent over-heating of the chamber heating elements.

Safety cut-off switch to prevent over-heating of the pipe heating element.

Safety pressure valve to prevent over-pressurizing of the chamber.
Warning!
Mind the Power socket. Keep it and its vicinity dry. Danger
of electrocution.