Page 28
Add Extra Dry Time
This quick option allows changing the Dry Time parameter for the current cycle.
1.
On the Quick Options screen, move the cursor to Add extra dry time.
2.
Press the START/STOP key.
3.
Choose the time value to be added, and press START/STOP key.
4.
The time shown on the screen will be added to the current value and you will
return to the cycle main screen.
5.
For example, if the dry time was 2 min., and you chose 10 minutes on the
Add Dry Time screen, the dry time for the current cycle will be 12 minutes.
Note:
In order to return to the default dry time value, enter the Add Extra Dry
time screen and choose zero value.
Set Date and Time
This quick option enables the operator to set date and time.
1.
On the Quick Option screen, choose Set Date And Time. Time and date are
displayed.
The time is displayed in the upper row in the form "HH:MM:SS". The hour
range is 24 hour (i.e. from "0" to "24")
The date is displayed in the lower row in the form "DD: MMM: YYYY".
2.
To increase or decrease the time or the date use the UP or DOWN keys.
3.
To move the cursor from one digit to another press the START/STOP key.
4.
After changing the time and the date, by pressing the START/STOP key
move the cursor to Set.
5.
When the cursor is on Set, confirm the new time and date by pressing UP or
DOWN keys.
9.2.
Entering the Main Menu
1.
When the system is ready, enter the QUICK OPTIONS screen by pressing
the UP and DOWN keys simultaneously.
2.
On the Quick Options screen, choose login.
3.
Press the UP or DOWN keys to move the cursor to Admin.
4.
0000 is displayed on the screen with the cursor blinking on the right digit.
5.
To increase or decrease the digits, press the UP or DOWN keys.
6.
After changing the code to 0001 move the cursor to Set by pressing the
START/STOP key.
7.
When Set is blinking, press the UP or DOWN keys to enter the MAIN MENU
of the autoclave.
8.
To browse through the directories, use the UP or DOWN keys.
9.
When the required directory is blinking, press the START/STOP key. The
required screen will be displayed.
9.3.
System Parameters
Screen Saver
This subdirectory enables the operator to set the screen saver time.
The default time value is 90 minutes. It is possible to increase or decrease the time value up
to a maximum of 600 minutes or down to a minimum 0 minutes.
1.
On the Main Menu, choose System Parameters\ Screen Saver.
2.
When entering the Screen Saver screen, the time will be displayed. The
cursor is blinking on the "minute" digit.
3.
The time is displayed in the form “0000” min.
4.
To increase or decrease the digits, press the UP or DOWN keys.
5.
After changing the value move the cursor to Set by pressing the
START/STOP.
6.
When Set is blinking, press the UP or DOWN keys inorderto confirm changes
and return to the previous screen.
Содержание 5075 HSG
Страница 2: ...http www tuttnauerusa com...
Страница 13: ...Page 11 3 13 Overall Dimensions...
