MAN205-0097044ENO Rev. A
Apr. 2014
Page 22 of 28 pages
5.4
Aborting a Cycle
1. Press
STOP
The autoclave automatically goes through a shutdown sequence.
The autoclave will signal the operator that the cycle has been aborted and will advise the
operator when the door can be opened. (See above)
Note:
If cycle is aborted in 2-door autoclave, only the
front door
can be opened.
DO NOT ATTEMPT TO OPEN THE DOOR UNTIL NOTIFIED THAT THE ABORT
SEQUENCE IS COMPLETE. IF THE CONTROLLER DOES NOT INDICATE THAT
THE SEQUENCE IS COMPLETE, DO NOT ATTEMPT TO OPEN THE DOOR.
CONTACT YOUR TUTTNAUER TRAINED AND CERTIFIED AUTOCLAVE
TECHNICIAN.
