MAN205-0097044ENO Rev. A
Apr. 2014
Page 18 of 28 pages
2.
To select a sterilization cycle, tap the 'Program Selector Key' (top left-hand
corner of screen).
The Program Select screens appear.
Note:
Screen captures shown in this manual are provided for illustrative purposes
ONLY. The options available on your autoclave depend on its configuration and
may differ those shown in these illustrations.
3.
To find the desired sterilization cycle, tap
to go to the next page of the
list. and tap
to go back to the previous page.
4.
To select a sterilization cycle from the list, tap on the cycle number.
5.
Press
when done.
The "Autoclave Control Screen" re-appears.
Make sure that you selected the correct cycle.
6.
Load the autoclave following the steps indicated in the 'Loading' paragraph.
