MAN205-0097044ENO Rev. A
Apr. 2014
Page 9 of 28 pages
2.2 Printer
Handling
Maintenance
Wipe off any dirt on the printer surface with a dry soft cloth with a weak neutral
detergent. After that, wipe the printer with a dry cloth.
Setting Paper
Printer model PLUS II front view
1. Paper
mouth
2. STATUS
Led
3.
OPEN key (for paper roll compartment opening)
4. FEED
key
5.
Paper roll compartment
6.
Paper end sensor
1.
Open the printer cover door (3) by pulling it at the left bottom corner (2)
2.
Press the OPEN key to open the printer cover as shown (see Fig. 3/1). Handle
the paper cutter carefully not to cut your hand.
3.
Place the paper roll making sure it unrolls in the proper direction as shown
(see Fig. 3/2).
4.
The paper should roll off the top of the roll.
5.
Hold the loose end of the paper with one hand and re-close the cover with the
other hand as shown (see Fig. 3/3) the printer cover is locked.
6.
Tear off the exceeding paper using the jagged edge (see Fig. 3/4).
Fig. 1
