Turnstiles Traffic H1, Руководство по эксплуатации

Страница: 37 / 101

Assembly and installation
5816,0013US / Version 02 37
The following procedures have to be observed during assembly
and installation:
 Unpack barrier and accessories.
 Mount barrier housing on the foundation.
 Mount safety scanner.
 Assemble and install signalling device.
 Arrange electrical connections.

See page 47, chapter 8.
 Assembly flange and barrier arm.

See page 54, chapter 9.
7.3 Foundation and empty conduits
1
1
min. 2 ft
(min. 600)
3
5
4
min.
31.5
(min.
800)
3.94
(100)
23.6
(600)
2
Mag00547a
min. 2 ft
(min. 600)
t t
Fig. 8: Assembly barrier system
Dimensions in inch or feet are without parenthesis.
Dimensions in mm are in parenthesis.
1 Object such as wall, building, etc.
Keep a safety distance of at least 2 ft (610 mm) between the barrier
arm and other objects, such as walls, masonry or houses.

See
page 26, chapter 2.7
2 Anchor support (accessory), required from 11.5 ft (3.5 m) onwards
3 Empty conduit for induction loop connection
4 One empty conduit each for mains cable and control lines
5 Foundation with reinforcement grid for barrier housing
Traffic H1 Swing Gate Horizontal Barrier
www.TURNSTILES.us | patrick.mcallister@TURNSTILES.us | 303-670-1099