26
www.turck.com
• 1-800-544-7769 • Fax:
(763)
553-0708 • TURCK
• Minneapolis,
MN
55441
www.turck.com
• 1-800-544-7769
• Fax: (763) 553-0708
• TURCK • Minneapolis, MN 55441
27
TURCK
RM-89
Adding the RM-89 to a Scan List (continued)
Figure 3 .5 below shows the layout of the Edit I/O Parameters window . Note that the Polled communications method is the
most commonly used .
• By default, the Strobed communications method is disabled . If enabled, the RM-89 will use eight bytes
of input data and eight bytes of output data . The eight bytes of output data are used to signal every
strobed device on the network simultaneously . A single bit will be assigned to the RM-89 in the output
data . Set this bit to force the RM-89 to update its data .
• By default, the Polled communications method is enabled and the RM-89 uses eight bytes of input
data and five bytes of output data . The five bytes of output data is used the hold the Preset Value and commands .
• By default the Cyclic communications method is disabled . When Polled is enabled along with Cyclic
communications, the Output size value is disabled and defaults to zero . If you choose to disable the
Polled connection, the Output Size field enables and you must set it to a value of “5” .
Note:
The RM-89 does not support the Change of State communications method .
Figure 3 .5 Edit I/O Parameters
Содержание DeviceNet RM-89
Страница 1: ...USER MANUAL MA1007 REV B Published 4 15 2015 RM 89 DeviceNet Resolver...
Страница 14: ...14 www turck com 1 800 544 7769 Fax 763 553 0708 TURCK Minneapolis MN 55441 TURCK RM 89 Notes...
Страница 38: ...38 www turck com 1 800 544 7769 Fax 763 553 0708 TURCK Minneapolis MN 55441 TURCK RM 89 Notes...
