TTC T-BERD 107A, Справочное руководство

Страница: 131 / 261

4-34
SECTION 4
AUXILIARY
FUNCTIONS
When the AUX SMARTNET function is dis-
played, the CATEGORY switch is used to select the
intelligent network equipment type, while the RE-
SULTS switch is used to select the make/model. All
equipment types have a NONE selection for make/
model to indicate the equipment is not installed in the
network being tested. Refer to Appendix D for tables
that list the intelligent network equipment, available
addresses, and commands.
Use the following procedure to select the intel-
ligent network equipment type.
1. AUX and PATTERN switch
Press the AUX switch to activate the auxiliary
functions. Press the PATTERN switch to
select the AUX SMARTNET function.
2. CATEGORY switch
Press either the up or down arrow to select the
appropriate intelligent network equipment
type (IOR, ILR, etc.).
3. RESULTS switch
Press either the up or down arrow to select the
specific manufacturer and model or NONE,
if applicable.
4. AUX switch
Press the AUX switch to return to the operat-
ing mode.
Consider the following functions and modes
when selecting an intelligent network equipment
type:
•
AUX LOOPCODE function
•
LOOP CODES switch