background image

EM606 M-Bus

METERS

UK

LTD

User Manual

KEY FEATURES

The EM606 is three phase kWh M-bus meter with a LCD display in a 

4 module (60mm) casing, ensuring a high accuracy class (Class1) 

Excellent long term stability which is designed for DIN, IEN and 

EN standards and 1 year warranty.

MID B approval which ensures the meter is produced to European 

and International standards and the meter is legally suited for both  

business and invoicing purposes.

For connection rate of up to 950A.

s a l e s @ m e t e r s . c o . u k    0 1 5 2 4  5 5 5  9 2 9

Three Phase 4 module energy meter 

METER SPECIFICATION

-25°C to +55°C

-30°C to +70°C

Performance Criteria

Operating Humidity

≤ 75%

Storage Humidity

≤ 95%

Operating Temperature

Storage Temperature

International Standard

Active Energy Meters Class 1/B

IEC62053-23| EN50470-1/3

Reactive Energy Meters Class 2

IEC62053-23  

Voltage, LN & LL (Phase 1,2,3)

± 0.5%

Amps (Phase 1,2,3)

± 0.5%

PF (Phase 1,2,3 & ∑)

± 0.2%

Active Power (Phase 1,2,3 & ∑)

± 0.5%

Reactive Power (Phase 1,2,3 & ∑)

± 0.5%

Apparent Power (Phase 1,2,3 & ∑)

± 0.5%

Frequency

± 0.2%

Active Energy   

± 1%

Reactive Energy   

± 1%

Accuracy Class

1/B 

Protection against penetration of dust and water

IP51

Insulating encased meter of protective class

II

The mecha ni ca l  a nd el ectroma gneti c envi ronmenta l  cl a s s es

Содержание EM606 M-Bus












Отзывы: