manualshive.com logo in svg

TTC T-BERD 107A, Справочное руководство

Поделиться
Скачать
TTC T-BERD 107A Скачать руководство пользователя страница 150

4-53

AUXILIARY
FUNCTIONS

SECTION

 4

Use the following procedure to set the time and

date.

1.

AUX and PATTERN switch

Press the 

AUX

 switch to activate the auxiliary

functions. Press the 

PATTERN

 switch to

select the AUX CLOCK function.

2.

CATEGORY switch

Press the up arrow to move the highlight
from left to right through the five parameters,
HH, MM, MMM, DD, and YY. Press the
down arrow to move the highlight from right
to left.

3.

RESULTS switch

Press the up arrow (increase) or the down
arrow (decrease) to change the highlighted
parameter to the desired value, as follows:

HH — 00 to 23 hours.
MM — 00 to 59 minutes.
MMM — three letter abbreviation for
month from JAN to DEC.
DD — 01 to 31 days. Internal calendar
automatically adjusts the days in each
month and for leap year.
YY — 00 to 99.

4.

Repeat to set other parameters

Repeat Steps 2 and 3 to set the remaining
time and date parameters to the desired
values.

Содержание T-BERD 107A






































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды