TT Tooth Transformer TT Transformer, Руководство пользователя

Страница: 7 / 26

Rev. 5 of 01.08.2020 7
2.2 SAFETY INSTRUCTIONS
2.2.1 TT TRANSFORMER
TT Tooth Transformer srl shall not be liable for any and all direct or indirect loss or damage to property, death
or personal injury in the event that:
• TT Transformer is used for purposes other than its intended use as set out herein.
• TT Transformer is used in a way that is not compliant with any and all instrucTons and requirements set out in
this manual.
• The electrical system of the premises where TT Transformer is used is not compliant with applicable standards
and regulaTons.
• Storage and preservaTon condiTons of TT Transformer are not compliant with the specificaTons set out in the
relevant secTon herein.
WARNING : use of parts that are not made or authorized by TT Tooth Transformer srl (‘use of non-genuine
parts’), may cause damage beyond repair to the device which as a result may no longer funcTon as it is
supposed to, and put the paTent at risk.
Use of non-genuine parts will void the Manufacturer’s warranty and product cerAficaAon!
WARNING : qualified and specialized personnel.
The device must be used exclusively by qualified, adequately trained personnel.
If the device is used as instructed, no side effects will ensue.
WARNING : intended Use .
Use the device only for the uses for which it is intended.
Failure to do so may cause serious injury to the paTent and the operator, device damage or faults.
WARNING : cleaning, disinfecAon, sterilizaAon of new or repaired products.
Before treatment, all products - be they brand new or repaired - must be thoroughly cleaned, disinfected and/
or sterilized following the instrucTons set out in the “Cleaning and DisinfecTon” secTon herein.
WARNING : infecAon control. For utmost paTent and operator safety always use clean, disinfected and
sterilized accessories.
WARNING: use only genuine TT Transformer accessories and spare parts.
WARNING : check device condiAons prior to using it to process the extracted tooth.
Always make sure there is no water underneath/do not set on a damp surface.
Before each treatment session, always make sure the device is in perfect working order and check the
efficiency of accessories. Should you detect any anomalies in funcToning, do not use the device. Contact the
authorized dealer if the anomalies concern the device.
WARNING : DO NOT install in places where there is risk of explosions.
DO NOT operate TT Transformer in the presence of flammable gases or liquids.
WARNING: a warning label is applied near the cylinder (figs.15-21, fig.29 and fig.33) which indicates that it is
near an area where there is the presence of potenTally corrosive reagents (cartridge and cylinder) and that the
metallic surface which surrounds the cylinder can be hot.