TT Tooth Transformer TT Transformer, Руководство пользователя

Страница: 17 / 26

Rev. 5 of 01.08.2020 17
Power input (24 Vdc)
Power switch (ON/OFF)
Fig.23: Power switch posiTon
Check the absence of alert message on the display. If all check rouTne are ended well, the display will show
“READY”.
Now, the user have only to press the buWon “START” (fig.24) to begin the automaTc process.
During the process the display will show to the user the processing’s phase in which the device is.
START buWon
4.4 END OF THE PROCESS
An acousTc alert advises the user that the process is finished and the display shows the message: “END
TREATMENT”.
Now it is possible to use the resulTng autologous material (collected inside the maker) for the dedicated use.
WARNING : before opening the machine to keep the resulTng autologous material, please TURN
OFF the device using the general switch on the back of the case.
WARNING : user has to use GLOVES to open the device and keep the maker that collects autologous material.
Fig.24