TT Tooth Transformer TT Transformer, Руководство пользователя

Страница: 23 / 26

Rev. 5 of 01.08.2020 23
10. TRANSPORT AND STORAGE
TT Transformer must be stored without the liquids tank inside the device in order to avoid loss of
liquids and reagents inside the machine. The unit must be kept in its hard cover box, in an environment
free of dust, at a temperature between -20 °C and +60 °C and at a relaTve humidity less than 80%.
WARNING : DO NOT move the machine in case of presence of waste in the underlying drawer.
11. WASTE DISPOSAL
TT Transformer contains inside electrical and electronic components, it is mandatory to proceed to its
disposal separately from household waste as required by the DirecTve 2012/19/EU (RAEE). Disposal
can take place only at authorized treatment centers for electrical and electronic equipment on naTonal
territory. It is therefore invited to idenTfy, prior to disposal, the nearest authorized center.
AlternaTvely, the device can be returned to the manufacturer who will proceed to its recovery and
recycling. Not properly manage this waste, risks to generate a consequent increase in polluTon of the
soil, air and water with implicaTons for human health.
The Device must be treated and disposed of as electric and electronic waste. Failure to do so will result
in penalTes as per DirecTve 2012/19/EU (RAEE).
WARNING: hospital waste .
The following components must be treated and disposed of as hospital waste:
• MAKER
• CYLINDER
• TANK
12. DISPOSAL OF MAKER, CYLINDER AND
LIQUID TANK
WARNING : single-use components must be keep away from new components and immediately
put with waste aqer the use.
According to the direcTve 2012/19/EU (RAEE)
Organic waste collected in the drawer of the device, maker, cylinder and liquid tank must be
managed according to the waste procedure of the denTstry’s office as special waste with biological
hazard.
WARNING: used components must be kept away from new components and immediately put
with waste aqer use.