TT Tooth Transformer TT Transformer, Руководство пользователя

Страница: 11 / 26

3.3 TANK, MAKER AND CYLINDER INSTALLATION
WARNING : verify that the sterile blister pack with single-use
components is intact (figs.13-14). In case of damage do not use
and dispose in special waste.
CAUTION : aqer opening the single-use blister pack,
verify that the single-use components are not
damaged and are not leaking. Specifically check for
cracks or breaks in the MAKER, CYLINDER and that
the TANK does not reveal liquid leakages.
In case of damage do not use and dispose
in special waste.
Rev. 5 of 01.08.2020 11
WARNING : Verify that the
slide is clean (fig.15).
Fig.13
Fig.14
Fig.16 Fig.17
TANK
Insert the TANK with the
tape facing upward and
projecTng pieces facing
the front (fig.18)
into the grooves on the
slide walls (fig.19).
Gently push the TANK
unTl it reaches the end of
the slide.
Fig.19
MAKER
CYLINDER
Fig.15
Fig.18