CONTENTS
1.Specifications ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
3
1-1.Abstract
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
3
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
3
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
4
2.Before using ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
4
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
4
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
4
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
4
・・・・・・・・・・・・・・・・・・・・・・・・・・・・
5
・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
7
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
2-4-3.Start signal (TTL positive logic) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
2-4-4.Stop signal (TTL positive logic) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
2-4-5.Gate signal (TTL positive logic) ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
2-4-6.Monitor out signal(In counting, TTL positive logic)
・・・・・・・・・・・・・・・・・・・
8
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
・・・・・・・・・・・・・・
8
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
8
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
9
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
9
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
9
3-2-5.Setting and readout of preset counter ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
9
3-2-6.Setting and readout of preset timer
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
10
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
10
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
10
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
10
・・・・・・・・・・・・・・・・・・・・・・・・ 10
・・・・・・・・・・・・・・・・・・・
10
・・・・・・・・・・・・・・・・・・・・・・・・ 11
・・・・・・・・・・・・・・・・・・・・・・・・ 11
3-5.Inquiry of over-flow count data ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
11
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
11
3-7.Other commands
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
12
4.Firmware update
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
13
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
14
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
14
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
14
・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・
15
8.Performance and specifications
3-6.Inquiry of software version information
5.Synchronous drive of multi units
6.Regulations and guidelines
7.Interfacing to external devices
3-4.Read-out and clear commands for counter and timer
3-4-1.Read-out and clear commands for all counter and timer
3-4-2.Read-out and clear commands for all counter
3-4-3.Read-out and clear commands for timer
3-1.Communication commands
3-2.Read-out commands for counter set and the status of setting
3-2-1.Stop enable by count value
3-2-2.Stop enable by timer value
3-2-3.Stop disable by counter timer
3-2-4.Inquiry of action mode
3-3.Commands of counter operation
3-3-1.Counter start
3-3-2.Counter stop
1-2.Appearance
1-3.Block diagram
2-1.Select input signal level for count
2-2.Setting LAN communication
2-2-1.Preparation for setting
2-2-2.Changing setting condition for net-work
2-2-3.Turn back PC set data
2-2-4.Connecting test
2-3.Setting USB communication
2-3-1.Preparations for setting
2-3-2.Connecting test
2-4.Connect communication cables
2-4-1.Connect communication cables
2-4-2.Connect count signal
3.Explanation of communication commands
2/15