３－２－６．Setting and readout of preset timer
Type of command
ＳＴＰＲdddd・・・・
To set preset value dddd・・・・・ in decimal to timer.
Unit is ms.
Maximum timer set value is 1,099,511,627 ms.
ＳＴＰＲＦdddd・・・・
To set preset value dddd・・・・・ in decimal to timer.
Unit is μs.
Maximum timer set value is 1,099,511,627,775 μs.
Inquiry command format
ＴＰＲ？
To read out preset timer value.
Reply
００123456
Reply data is 8 digit decimal value.
4294967000
(If reply data is over 8 digit, the digit is as the timer digit.)
Unit is ms.
ＴＰＲＦ？
To read out preset count value.
Reply
００123456
Reply data is 8 digit decimal value.
4294967000
(If reply data is over 8 digit, the digit is as the timer digit.)
Unit is μs.
Type of command
STRT
Enable counter start.
Type of command
STＯＰ
Enable counter stop.
Type of command
ＲＤＡＬ？
To read all counter channels and timer
Reply
１２３４５６７８９０ ２３４５６７８９０１ ３４５６７８９０１２ ・・・・・ ０１２３４５６７８９
These data are 10 digit number in decimal.
The data order is CH0 CH1 CH2 ･･････ CH7 timer.
If reply data is over 10 digit, the digit is as the value digit.
Unit is cts for counter and μs for timer.
Type of command
ＣＬＡＬ？
To clear all counter channels and timer
３－３．Commands of counter operation
３－３－１．Counter start
３－３－２．Counter stop
３－４．Read-out and clear commands for counter and timer
３－４－１．Read-out and clear commands for all counter and timer
10/15
