Type of command
ENTS
Enable to stop count by timer.
When timer value reach to preset timer value, count action
automatically stopped.
Type of command
DSAS
Disable to stop count by counter (CH7) or timer.
Counter doesn't stop automatically.
To quit counter action, it's valid to "STOP" command or "STOP" input
signal (TTL level).
Type of command
MOD?
The latest counter mode is read.
Reply
R_SN_T_O
R: remote mode (fixed)
SN: single mode (fixed)
T: T/timer stop mode, C/counter stop mode, N/not stop mode
（When power switch on, the last mode data is restored）
O: O/counter On, F/counter off
（When power switch on, count function is "OFF".）
３－２－５．Setting and readout of preset counter
Type of command
ＳＣＰＲdddd・・・・
To set preset value dddd・・・・・ in decimal to preset counter.
Unit is Kcts.
Maximum value is 281,474,976,710 Kcts.
ＳＣＰＲＦdddd・・・・
To set preset value dddd・・・・・ in decimal to preset counter.
Unit is cts.
Maximum value is 281,474,976,710,655 cts.
*) The preset value is round down to multiple number of eight.
Inquiry command format
ＣＰＲ？
To read out preset count value.
Reply
Reply data is 8 digit decimal value.
4294967000
(If reply data is over 8 digit, the digit is as the count digit.)
Unit is Kcts.
ＣＰＲF？
To read out preset count value.
Reply
Reply data is 8 digit decimal value.
4294967000
(If reply data is over 8 digit, the digit is as the count digit.)
Unit is cts.
３－２－２．Stop enable by timer value
３－２－３．Disable auto stopping by counter value or timer va
３－２－４．Inquiry of action mode
00654321
00654321
9/15
