TRUST 1210K POWERC@M OPTICAL ZOOM
Instructions when using for the first time
Chapter
!
1.
Install/replace batteries
(5)
1.
Install/replace batteries
(5)
2.
Using the camera
(6)
2.
Using the camera
(6)
3.
Install drivers (PC)
(7)
3.
Install drivers (PC)
(7)
U K
4.
Connecting to a computer
(8)
4.
Connecting to a computer
(8)
5.
Install application software (PC only)
(9)
5.
Install application software (PC only)
(9)
6.
Advanced camera settings
(10)
6.
Advanced camera settings
(10)
1 Introduction
1 Introduction
This instruction manual is for users of the TRUST 1210K LCD POWERC@M ZOOM.
This camera has a high resolution of 5.0 Mpixels (2496 x 1872), a lens with 3x optical
zoom and 4x digital zoom and 15 MB internal flash memory. The camera’s memory
can be increased up to a maximum of 512 Mbytes (256 MB guaranteed!) using an
optional Secure Digital Card (SD) or Multimedia Card (MMC). In addition, the camera
can record short video clips with sound.
This instruction manual is for users of the TRUST 1210K LCD POWERC@M ZOOM.
This camera has a high resolution of 5.0 Mpixels (2496 x 1872), a lens with 3x optical
zoom and 4x digital zoom and 15 MB internal flash memory. The camera’s memory
can be increased up to a maximum of 512 Mbytes (256 MB guaranteed!) using an
optional Secure Digital Card (SD) or Multimedia Card (MMC). In addition, the camera
can record short video clips with sound.
Please consult one of the Trust Customer Care Centres if you have any problems.
You can find more information at the back of this instruction manual.
Please consult one of the Trust Customer Care Centres if you have any problems.
You can find more information at the back of this instruction manual.
2 Safety
2 Safety
2.1 General
information
2.1 General
information
Carefully read the following instructions before use.
Carefully read the following instructions before use.
-
The TRUST 1210K POWERC@M OPTICAL ZOOM does not require any
special maintenance. Use a slightly damp, soft cloth to clean the camera.
-
The TRUST 1210K POWERC@M OPTICAL ZOOM does not require any
special maintenance. Use a slightly damp, soft cloth to clean the camera.
-
Do not use aggressive substances, such as white spirit, to clean the device.
These may harm the material.
-
Do not use aggressive substances, such as white spirit, to clean the device.
These may harm the material.
-
Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
-
Do not submerge the device in liquid. This may be dangerous and will
damage the device. Do not use this device near water.
-
Do not disassemble the camera. Touching the product’s internal parts could
result in injury. In the event of a malfunction, only a qualified technician should
repair the product. Should the product break open as a result of a fall or other
accident, take the product to an authorised service centre for inspection.
-
Do not disassemble the camera. Touching the product’s internal parts could
result in injury. In the event of a malfunction, only a qualified technician should
repair the product. Should the product break open as a result of a fall or other
accident, take the product to an authorised service centre for inspection.
-
Do not look at the sun through the viewfinder. Viewing the sun or other strong
light source through the viewfinder could cause permanent visual impairment.
-
Do not look at the sun through the viewfinder. Viewing the sun or other strong
light source through the viewfinder could cause permanent visual impairment.
-
Do not use in the presence of flammable gas. Using electronic equipment
near flammable gas could result in explosion or fire.
-
Do not use in the presence of flammable gas. Using electronic equipment
near flammable gas could result in explosion or fire.
-
Observe caution when operating the flash. Do not use the flash close to
anyone’s eyes. This can cause temporary damage to eyesight. Particular care
should be observed when photographing infants – keep the flash at a distance
of at least 1 meter from infants’ eyes.
-
Observe caution when operating the flash. Do not use the flash close to
anyone’s eyes. This can cause temporary damage to eyesight. Particular care
should be observed when photographing infants – keep the flash at a distance
of at least 1 meter from infants’ eyes.
1
