The machine can be transported to the installation site on arm-
ored rollers in the following ways:
■
Position the machine directly on armored rollers when
unloading it from the truck.
■
Due to a danger of tilting,
only
raise the machine using
hydraulic hoisting jacks at the points marked and insert arm-
ored rollers underneath.
Positioning of the machine on the armored rollers
Fig. 102476
Jacking point for hydraulic hoisting jack
Fig. 109252
The following must be observed during transport with armored
rollers:
■
The support areas of the armored rollers must be located
centrally below the respective support points of the machine.
■
The machine may
not
be pulled using a forklift truck.
2
‐
20
Transport - Version 2
B1154en
Armored rollers
