In the case of hazardous substances, TRUMPF only indicates
the sources of danger. The user must estimate the dangers
caused by a raw material. The user must check and estimate
the required measures.
When the machine is switched off the valve for the main gas
supply must be closed.
During welding, gas and particles that are hazardous to
health can escape.
Gas and particles can get into the airways.
Ø
Only use the machine with an exhaust system that works
properly.
During welding and processing of stainless steels gas and
particles are produced that are hazardous to health, and
which cannot be filtered via the integrated exhaust system.
Gas and particles can get into the airways.
Ø
Do not suction any stainless steels, such as V2A, V4A, etc.,
with the integrated exhaust system of the mobile welding
cell.
Ø
Weld stainless steels exclusively with a separate exhaust
system to outside.
Ø
Observe the national provisions for processing stainless
steels.
During maintenance work, gas and particles that are
hazardous to health can escape.
Irritation and diseases of the airways may occur.
Ø
Wear a breathing mask when performing maintenance oper-
ations on the integrated exhaust system.
Shielding gas escaping uncontrollably
Danger of suffocation
Ø
Make sure there is a sufficient fresh air supply.
Ø
Check the main gas supply of the shielding gas for uncon-
trolled gas leakage prior to every start-up.
Ø
Close gas tap when not in operation.
B1154en
2020-09-01
Hazards
1
‐
13
WARNING
WARNING
WARNING
WARNING
