Trumpf KF023, Руководство оператора

Страница: 74 / 176

Crossjet TL 150
S0.25 Crossjet TL 200
S0.25 MDE nozzles
Pressure
1 2.5 to 5.0 bar
(recommended 4.5 bar) 2.5 to 5.0 bar
(recommended 4.5 bar) 0.4 to 0.8 bar
Hose diameter 1 x 16 mm 2 x 16 mm 6 mm
Air consumption 1500 to 2200 l/min max. 3300 l/min 60 to 90 l/min
Slot width 0.25 mm 0.25 mm –
Noise level > 90 dB(A) > 90 dB(A) –
Compressed air Tab. 2-5
Note
The cross-section of the compressed air supply line must be
large enough to ensure optimum mode of operation of the cross-
jet (3).
Use a compressed air hose with an outside diameter of 16 mm
and inside diameter of at least 11 mm for the supply!
The required pressure depends on the formation of splatter from
the respective welding application. In some cases, the value
may exceed the indicated upper limit.
Note
Please note that the indicated pressure must be present in the
nozzle body of the crossjet. The connected hose causes a pres-
sure loss, depending on the length and diameter of the hose.
The required pressure depends on the plasma torch of the
respective welding application.
Note
The air consumption has to be adjusted directly before the MDE
nozzles by means of suspended solid particle flowmeter and
reducing valve in the supply line.
1 inside the nozzle body of the crossjet
2 ‐ 36
Installation 2022-03 12-29-01-A1-CRen
Crossjet
MDE nozzles