Section 4
Configuring Your Printer Adapter
WindConnect II Printer Adapter with
Bluetooth
Technology User’s Guide -- Document #40xxx-110 Rev. X3
4-2
Using the
TROY
Configuration
Utility
(Windows
98SE, ME, 2000,
XP)
NOTE: To use the Microsoft
Bluetooth
stack, you must be running the Windows XP operating system with SP1
(Service Pack 1) installed in order to communicate with the WindConnect II.
1. Before using the TROY Configuration Utility, the WindConnect II must be placed into the configuration mode
before any of its settings can be changed. Press and hold the test button on the printer adapter for at least
five seconds until the bi-colored LED cycles between amber and green to indicate that it has entered the
configuration mode. After the printer adapter configuration is complete, the device will automatically reboot.
NOTE: You cannot print while the WindConnect II is in configuration mode.
2. From the Windows desktop, click on
Start
,
Programs
, and then click on
Configuration Utility
. The
Port
Status
tab screen will appear; however, none of the controls will be active until a connection is established
in Step 3.
