Trox Technik FSL-CONTROL II, Руководство по установке и настройке, Страница: 73 / 80

Configuring interfaces to the central BMS
Modbus RTU interface
Single room control system FSL
‑
CONTROL II 73
9
Register
address Useful data
name Direction
EM / GG Modbus
values Modbus
default SPI bytes Encoding / Unit / Resolution
30 Alarm2 GG -> EM 0 - 1 0 Low, (High=0)
31 Release GG -> EM 0 - 1 0 Low, (High=0)
32 Status GG -> EM uint16 0 High, Low
33 RTemp GG -> EM sint16 0x7FFF High, Low Unit 0.01°C
34 Sum_Sup GG -> EM uint16 0 High, Low Unit l/s
35 Sum_Exh GG -> EM uint16 0 High, Low Unit l/s
36 SystemDevices GG -> EM uint16 0 High, Low no unit
37 ActFire GG -> EM 0 - 1 0 Low, (High=0)
38 FanForce EM -> GG 0 - 1 0 Low, (High=0)
39 ActFanForce GG -> EM 0 – 1 0 Low, (High=0)
Bit list for X-AIRCONTROL
The Read Coils and Write Single Coil functions are used to access binary data;
this is in addition to the above register accesses.
The Write Single Coil function encodes the binary value by (false -> 0x0000,
true -> 0x0001) and writes the result to the register.
For bit addresses 0-15 the Read Coils function reads the registers and re-
encodes to bit values by using bit 0 of the register values.
Bit addresses 16-22 are copies of the Status register (address 32).
Direction column:
EM -> GG Reading and writing of bits
GG -> EM Reading of bits
------------------------------------------------
Bit Useful data Direction
address register name EM / GG
------------------------------------------------
Bits from several registers
0 StartPCM EM -> GG
1 Fire EM -> GG
2 Window EM -> GG
3 ExtraTime EM -> GG
4 FanForce EM -> GG
------------------------------------------------
8 ActFanForce GG -> EM
9 ActFire GG -> EM
10 ActWindow GG -> EM
11 ActExtraTime GG -> EM
12 Falarm GG -> EM
13 Alarm1 GG -> EM
14 Alarm2 GG -> EM
15 Release GG -> EM
------------------------------------------------
Bits from Status register
16 Powersupply GG -> EM
17 EMFSLIO GG -> EM
18 FanBlocked GG -> EM
19 SensorError GG -> EM
20 FilterAlarm GG -> EM
21 FlowControl GG -> EM
22 DamperCalibration GG -> EM
------------------------------------------------