Trox Technik FSL-CONTROL II, Руководство по установке и настройке, Страница: 55 / 80

He, 21 March 2017
C:\Users\SCHMITHUESEN\Desktop\170321_Datenpunkte XAC_EN.docx 15
nvoHWStatus
SNVT_state
Function: Hardware messages, 16-bit string
The following list applies to LON and Modbus (register 32)
•
Bit 0: XXX
•
Bit 1: XXX
•
Bit 2: Fan blocked
•
Bit 3: XXX
•
Bit 4: Filter alarm
•
Bit 5: XXX
•
Bit 6: XXX
•
Bit 7 to bit 15 XXX
The following list applies to BACnet:
•
Instance 11: Power supply
•
Instance 12: Master module SEM-AWIO
•
Instance 13: Fan blocked
•
Instance 14: Sensor error
•
Instance 15: Filter alarm
•
Instances 16 and 17 are not used
nvoReturnTemp
SNVT_temp_p
Function: Feedback of the actual return temperature to the central BMS
(additional hardware required)
LON value BACnet value Modbus value
(Register 33)
Enter with 2 decimal
places, e.g. 23 °C

23.00
Enter with 2 decimal
places, e.g. 23 °C

23.00
Enter without decimal
places, multiply with 100,
e.g. 23.00 °C

2300
Invalid: 327,67 Invalid: 327,67 Invalid: 327,67
nvoSumSup
SNVT_vol
Function: Feedback of the supply air total volume flow rate for all devices
(masters and slaves) in this control circuit. The output is a number and it is
identical for LON, BACnet and Modbus; the unit of measure is [l/s].
Configuring interfaces to the central BMS
List of data points
Single room control system FSL
‑
CONTROL II 55