Trotec ProMarker 300, Руководство по эксплуатации

Страница: 18 / 42

SpeedMarker 300 /
ProMarker 300
Ausgabe 1.0
Technische Änderungen vorbehalten.

TROTEC Produktions- u. Vertriebs GmbH
Linzer Straße 156, A
– 4600 Wels
Seite 18 von 42
Unloading, Inspection and Reporting Faults
In the event of transportation damage or incomplete delivery:

Record all details in writing immediately.

Note all claims on the transportation documents.

Photograph any damage.

Send report to Trotec.
When unloading:
The marking head is connected to the actual laser source in the laser module via an approx. 2.1
m long fibre optic cable. The fibre optic cable is enclosed with the jumper cables in a black protec-
tive tube for protection.
Avoid any unnecessary stretching or bending by a radius more then
66 mm of the fibre optic cable. This could damage the fibre optic cable.
The lens unit should only be uncovered following installation. The lenses are high quality optical
components which must be kept clean in order to ensure optimum marking results. Never touch
the lenses with bare fingers!
After unloading:

Inspect the machine and machine components for transportation damage.

Check the delivery for completeness.

Remove all transport packaging.