SpeedMarker 300 /
ProMarker 300
Ausgabe 1.0
Technische Änderungen vorbehalten.
TROTEC Produktions- u. Vertriebs GmbH
Linzer Straße 156, A
– 4600 Wels
Seite
12
von 42
In case of using highly reflecting materials like
blank or polished metals
metals with very high reflectivity like copper, brass, gold, silver
any materials with highly reflecting coatings
other highly reflecting materials
,
especially in combination with high laser power, low processing speed and/or work pieces with curved or
inclined surfaces, laser radiation might be reflected towards the protection cover. With a very low proba-
bility this protection cover could be damaged if the reflected radiation is FOCUSSED onto the surface of
the protection cover.
Therefore visual inspection for point-like defects on the protection cover should be done if the aforemen-
tioned conditions are given.
The loss of yellow color on the protection cover indicates a damage of the protecting layer. If you detect
such effects, immediately turn off the laser machine and take care to get a new protection cover.
Also other components inside the machine may be damaged if the aforementioned conditions are given. To improve
laser safety an optional “Laser Protection Cover” is available on request.
