SpeedMarker 300 /
ProMarker 300
Ausgabe 1.0
Technische Änderungen vorbehalten.
TROTEC Produktions- u. Vertriebs GmbH
Linzer Straße 156, A
– 4600 Wels
Seite
13
von 42
Safety Precautions when Operating the Device
In your SpeedMarker 300 / ProMarker 300, a closed safety system is integrated which immediately switches off the
power to the laser tube when the protection cover is opened. Consequently an incomplete engraving can occur if
the cover is opened during operation.
Please remember the following safety precautions when working with this device:
A fire extinguisher must always be handy as the laser beam can ignite flammable materials. Do not store any
flammable materials in the inside of the device or in the immediate vicinity of the device. Particularly leftovers of
produced materials have to be removed to prevent fire hazard.
Unsupervised operation of the system is not permitted.
Adjustment of the beam path must be performed only by especially trained personnel. An improper setting can lead
to uncontrolled emission of the laser radiation.
Before processing materials the user must verify, whether harmful materials can be generated and whether the filter
equipment of the exhaust system is suitable for the harmful materials. We emphasize that it is the responsibility of
the user, to consider the national and regional threshold values for dust, fogs and gases when selecting the filters
and the exhaust system. (The values for the maximum workplace concentration must not be exceeded.)
Please refer to the manual of the exhaust system on how and in what intervals you need to replace filters.
PVC (polyvinyl chloride) must under no circumstances be processed with the laser.
Should you have further questions before starting work, please contact your dealer or Trotec.
