Trotec IDS 20, Оригинальное руководство пользователя

Страница: 16 / 26

16 EN
oil heater IDS 20 / IDS 30
Fan switches off during start-up/operation;
operating display permanently illuminated in red,
self-diagnosis indication permanently illuminated
in orange Internal error of the electronic control unit Charge the customer service with the following
tasks:
• to have the control unit reset; try at least
twice. If the problem persists, have the
control unit replaced.
Fan starts, but the flame generates smoke;
operating display permanently illuminated in
green Insufficient combustion air supply • Remove all obstacles and obstructions from
the inlet and/or outlet openings.
• Have the position of the adjustment ring for
the regulation of the air supply checked by
the customer service.
• Have the supporting disc of the burner
cleaned by the customer service
Excessive combustion air supply Have the position of the adjustment ring for the
regulation of the air supply checked by the
customer service
Used fuel oil contaminated or contains water Replace used fuel oil with clean fuel oil.
Clean the fuel oil filter.
Air inside the fuel oil circuit Have the lines and the fuel oil filter checked for
tightness by the customer service.
Insufficient fuel oil quantity at the burner Charge the customer service with the following
tasks:
• to have the pump pressure checked.
• to have the nozzle cleaned or replaced
Excessive amount of fuel oil at the burner Charge the customer service with the following
tasks:
• to have the pump pressure checked.
• to have the nozzle replaced.
Device switches off; operating display
permanently illuminated in green Sealing of the magnet valve faulty Have the magnet valve replaced by the customer
service.