19
CLEANING THE FILTER
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by a competent person.
•
SWITCH OFF
the electricity and water supply
at the mains.
• The inlet filter is situated inside the water inlet
fitting
(fi g.21)
.
• To gain access to the filter remove the cover.
• Remove the retaining screw.
• Turn the filter fitting anti-clockwise and
remove from the housing.
• Inspect the ‘O’ ring for damage when the
filter is removed.
• When cleaning the filter,
DO NOT
use a sharp
object, as it will cause damage. It is preferable
to use an old toothbrush or similar.
• To reassemble, follow the procedure in
reverse.
• Make sure that the sealing ‘O’ ring is in place
and
DO NOT
over tighten the retaining screw
on reassembly.
Instructions for installers and service engineers only
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
Instructions for installers and service engineers only
CLEANING THE FILTER - INSTALLERS & SERVICE ENGINEERS
Fig.21
Retaining screw