9
Warning!
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play
with the appliance.
To adjust the shower temperature -
Maximum and Economy settings only
• The water temperature is altered by changing
the amount of Hot water from the heater
can that is mixed with Cold water from the
inlet. This is done by moving the temperature
control knob
(fi g.7).
• Adjusting the temperature control will alter
the flow of water through the unit.
• After obtaining your preferred showering
temperature, the control can be left where it
is, as the preferred setting.
To decrease the shower temperature
• Turn the temperature control
anti-clockwise
- this will increase the flow of water through
the shower and make the water
colder
.
To increase the shower temperature
• Turn the temperature control
clockwise
- this
will decrease the flow of water through the
shower and make the water
hotter
.
• When the start/stop button is pressed water
will continue to flow in order to remove
heated water inside the unit
(see phased
shutdown process, P5)
.
• Water will cease to flow after a few seconds.
• After phased shutdown the unit
MUST
be
isolated via the 45amp-isolating switch.
Note:
It is advisable that the showering
temperature is satisfactory by testing with your
hand before stepping under the showerhead.
There will always be a time delay of a few
seconds between selecting a flow rate and the
water reaching the stable temperature for that
flow rate.
USER OPERATING INSTRUCTIONS
Temperature
control knob
Fig.7
Colder
Hotter
