8
OPERATING THE SHOWER -
(fi g.6)
• When the electricity supply to the shower
is switched on at the isolating switch, the
“power”
indicator will light.
To start the shower
• Press the start/stop button and water will
flow. After a few seconds, a flow of heated
water will be available.
NOTE:
the shower always starts on the Maximum
heat setting.
To stop the shower
• The shower can be stopped by pressing the
start/stop button. When pressed, the phased
shutdown will begin and water will cease to
flow after a few seconds.
Maximum setting -
2 heat indicators lit
•
Maximum:
The shower will start on
Maximum. The two Heat setting indicators
will light.
Economy setting -
1 heat indicators lit
•
Economy:
Press the ‘Maximum/Economy’
button once, and one indicator will go
out. This shows that the shower is now in
‘Economy’ mode.
Cold setting -
Cold indicator lit
•
Cold:
Press the ‘Cold’ button once, and the
cold setting indicator will light. This shows
that the shower is now in ‘Cold’ mode.
The cold setting does not provide any heat
from the heater can to the incoming water.
IMPORTANT:
it will take a few seconds for the
temperature to stabilise once changes have been
made.
USER OPERATING INSTRUCTIONS
Start/Stop button
Fig.6
Power ‘on’ indicator
Heat setting indicators
Cold setting indicator
Maximum &
Economy button
Cold button
