Tritech SeaKing Скачать руководство пользователя страница 9

Страница: 9 / 54

SeaKing & SeaPrince Imaging Sonars

0374-SOM-00001, Issue: 08

© Tritech International Ltd.

3. Installation

3.1. General Overview

The SeaKing and SeaPrince heads are supplied with a waterblock fitted to the device and as

standard a proprietary connector usually referred to as the "Tritech 6-Way Connector". Other

connectors are available (see Appendix E,

SeaKing Sonar & Profiler Connector Options

) and

various lengths of test cable can be supplied with the connector. For more details contact

Tritech International Ltd

The waterblock is fastened to the body tube of the head, and provides a 4000m rated

pressure bulkhead. This will protect the electronics from water ingress in case the connector

is damaged or not fitted correctly. The connector may be disconnected from the heads by

unscrewing the four securing screws.

Note

It is not necessary to remove the water block when removing the connector

or taking the head apart. Whilst the connector is removed from the head, the

blanking plugs supplied should be fitted to prevent the ingress of dirt or moisture.

3.2. Seanet Pro Software

Warning

SeaPrince Sonars with serial numbers 318289 and above incorporate the Mod

B improvements and updated firmware. If being used with Seanet Pro version

V2.24 dated prior to Feb 2020 do not “Update” the firmware as this will install a

previous version and may render the unit inoperable.

It is recommend that the Seanet Pro software be updated to V2.24 dated

03/02/2020 available from the Tritech website and contained on Rev 3 of the

Software and Manuals USB (0084-SOF-00002).

Should the previous version of firmware be loaded onto the SeaPrince Sonar

connection of the unit to an installation of Seanet Pro V2.24 (03/02/2020) will

allow the firmware to be updated to the correct revision.

The Seanet Pro Windows software will be provided either on an Installation CD-ROM (for

SeaHub interface to user computer) or pre-installed on the Seanet SCU.

For the CD-ROM Installation, if Setup does not auto-run on disc insertion, run the

SETUP.EXE file from the disc to start the installation.

Note

A DST SeaKing or SeaPrince sonar head will not work with the SONV3

application or run on a SCUv3

Содержание SeaKing























































Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды

Tritech SeaKing, Руководство по эксплуатации продукта

Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды