Tritech SeaKing Скачать руководство пользователя

Страница: 5 / 54

SeaKing & SeaPrince Imaging Sonars

0374-SOM-00001, Issue: 08

© Tritech International Ltd.

1. Introduction

The SeaKing and SeaPrince sonar "system" would consist of the sonar head, the

Tritech

International Ltd

Seanet Pro control and display software and either a Surface Control Unit

(SCU) or SeaHub. This manual deals with the sonar head and any specific aspects of Seanet

Pro that are necessary to get a system working. For more details of Seanet Pro please refer to

the Seanet Pro Software Manual and further details of the SeaHub or SCU can also be found

in their respective manuals (all current manuals are available on

www.moog.com/tritech

The Seanet Pro software is Windows based and provides control of the complete range of

sonars that

Tritech International Ltd

produce. It is also possible to display multiple devices

within Seanet Pro and as such two or more sonars can be networked together and displayed

on one computer.

The SeaKing and SeaPrince sonar head is typically configured to communicate with the SCU

or SeaHub using the ARCNET LAN telemetry protocol. This is the standard protocol that is

used in all SeaKing devices and provides a high bandwidth at a default communications rate

of 156kbit·s

-1

. It is also possible to reconfigure sensors to communicate at a lower baud rate

or using serial protocols (such as RS232).

The DST SeaKing DFS & Super SeaPrince sonar heads have the following features:

Scan rate

The heads can achieve a very fast scan rate which gives

faster target acquisition, and helps in obstacle avoidance.

Dual Frequency Operation

(SeaKing only)

The SeaKing DFS can use up to two operating

frequencies - one giving long range target acquisition

characteristics and the other giving shorter range, higher

definition, imaging capability. It is effectively two sonar

heads in a single housing.

Protected transducer

The SeaKing has a semi-rigid rubber boot and the

SeaPrince units have a rigid plastic boot, both are oil filled

and offer protection of the transducer head. The unit has

no rotating seals to be damaged or wear.

Electrical Connection

The SeaKing and SeaPrince heads use a

Tritech

International Ltd

6 pin underwater connector but can be

fitted with an alternative connector on request.

Содержание SeaKing























































Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды

Tritech SeaKing, Руководство по эксплуатации продукта

Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды