Tritech SeaKing Скачать руководство пользователя страница 6

Страница: 6 / 54

SeaKing & SeaPrince Imaging Sonars

0374-SOM-00001, Issue: 08

© Tritech International Ltd.

2. Getting Started

This section will detail the basic steps required in order to connect up your Tritech Sonar for

the first time to your surface controller (typically a Tritech SCU, PC or Laptop).

A standard Sonar system will comprise of the following elements:

• The Sonar unit - Super SeaKing or Super SeaPrince in this instance

• The Build Record Sheet - This contains detailed information on the configuration and pin

outs specific to this unit

• Accessory kit - this will contain extra o-rings and screws. Depending on the Sonar unit it

may also contain additional items

• Software and Manual CD - This holds a copy of all commercially released Tritech software

as well as electronic copies of manuals for

Tritech International Ltd

products

• Cable whip - this is an optional item, but is usually supplied for units fitted with a standard

Tritech International Ltd

connector

Ensure that the surface controller has Seanet Pro installed onto it, using the supplied CD if

necessary. The CD will contain a version of Seanet Pro that would have been appropriate

at the time of the manufacture of the Sonar unit, but for the latest version it is recommended

that the Tritech website be checked:

www.moog.com/tritech

Before attempting to connect up the Sonar with a test cable, check the communications

setting of the Sonar either by referring to the label on the unit - or by checking the Build

Record Sheet.

Once the setup of the Sonar is confirmed, use the cable whip (if supplied) to create a test

cable. Depending on the setup of the Sonar, differing cable wiring may be required:

ARCNET

Содержание SeaKing























































Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды

Tritech SeaKing, Руководство по эксплуатации продукта

Результаты поиска

Содержание SeaKing

Отзывы:

Похожие инструкции для SeaKing

Бренды по названию

Популярные бренды